My Basket

Leg Extension

£975.00 ex-VAT

Resale Club Line Leg Extension 1x100kg Weight Stack Tower with 7" Tactile Key Console in Midnight Grey with Black Upholstery (SmartCard Compatible)(110V/220V)


Frame Colour: Frame: Midnight Grey, Mouldings: Midnight Grey

Upholstery: Slate Black / Midnight (Single Black Stitching)

Console: 7" Tactile Key Console

Power Supply: 110V/220V

Grades: Grade B

Stock Level

Pre-Owned Grade B, Leg Extension (Selectorised, Strength).
This machine comes with a full service history.

Please Note: We have used a Library Shot to show the products appearance.

Model No

2 in stock

We will upgrade this equipment to Grade A condition (see Grades of Products).
NB: An equipment Service and replacement Upholstery is included in this upgrade.

We will service this item thoroughly before its dispatched.

Replace the existing upholstery with new. Guaranteed for 3 months.

Extend the Warranty on this item for an extra 12 months.

Make 3 payments of £325 (+VAT). No fees. Learn more
Make 4 payments of £243.75 (+VAT). No fees. Learn more

Product Information


127cm / 50″
150cm / 59-1/16″
106.5cm / 41-15/16″

286kg / 630.5lbs.
Incremental – Optional Add-on Weight
2.5kg / 5.5lbs.
Weight Stack Plates – Standard Total Weight
100kg / 220lbs.
Maximum User Weight
180kg / 397lbs.


Frame Construction
All Pulse Fitness products are constructed from durable steel that is designed to give exceptional structural integrity and stability even during the most vigorous workout
Frame Protection
Once welded, the frames are treated against corrosion by being grit blasted (for guaranteed durability). They are furnace baked, heat-cured and electrostatically epoxy powdercoated twice (which ensures maximum adhesion and coating thickness). This gives them a tough, corrosive-resistant and easy to clean finish, offering unbeatable reliability and longevity
Weight Stack Tower – Guarding
The weight stack tower is fully enclosed
Shrouds Colour

Fully Enclosed Weight Stack Tower / Magnetic and Tethered Weight Stack Pin / Weight Plates / Guide Rods
The Classic Strength Stations provide users with a low starting weight and yet still have the capacity of a full weight plate range. This means users can build up their workout gradually, whilst the equipment still accommodates the widest possible user group
The weight stack tower is completely covered to provide the best possible user safety experience (in full compliance with BS-EN standards), protecting bystanders from accidental contact with a moving weight plate
The front facing shroud is full-length, with a 60mm (2-3/8″) wide slot, giving access to the 8mm (5/16″) diameter, weight stack pin
The magnetic weight stack pin assures positive locking into the weight plates and is secured to the weight stack via a plastic-coated tether cable. The pin cannot be removed from the machine
The cast and machined solid-steel weight plates are 15mm (9/16″) thick, 5kg (11lbs), with precision fitted self-lubricating nylon bushes. This is to ensure smooth travel on the guide rods which are 20mm (13/16″) in diameter, made from steel, precision centreless ground, polished with corrosion-resistant chrome plating for a smooth operation and rust retardation
The weight stack tower is so positioned to be accessible from a seated position wherever possible
Weight Stack Suspension
Proven rubber bumper damping system
Smooth Operation
Pulse Fitness strength products are renowned for their smoothness of operation. This results from our precision-engineered transmission system and weight stack tower assembly, which reduces the coefficient of friction and significantly cuts maintenance costs
Belt Transmission
An ultra-modern manufacturing process is required to produce the open-ended steel-reinforced PU-flat belt (measuring 25mm (1″) x 2.3mm (1/16″)). This transmission system is constructed from a modified polyurethane which is lightweight, extremely flexible, has a high strength co-efficient (with a 92 shore A rating) is both hard-wearing and durable. It’s virtually corrosion-proof design is due to its metal cores being enclosed within a polyurethane shield. The cores are positioned parallel-to-edge in alignment which increases their combined flexibility.
This approach allows the bearing face of the Belt to be made wider and so the machines pulleys are more easily driven. The polyurethane coating, ensures the Belt has anti-slip traction and an efficient power transmission. All of this technology provides the user with a quiet, smooth operation
Enclosed Pulleys and Bearings
The pulleys are 7.4cm (2-15/16″) in diameter. They are constructed from polypropylene that is reinforced with fiberglass and are designed to be convex (both with and without side flanges). These crowned pulleys ensure excellent power transmission and produce a smooth running product
The pulley’s bearings are ABEC-rated, precision ground and have sealed ball bearing races, for added durability and a ‘fluid’ smooth feel
The pulley’s pivot axles are solid steel supported by 25mm (1″) precison moulded bushes that allow for precise alignment and frictionless movement
Hand-Grip Assembly
The hand-grips have been positioned to ensure a neutral wrist position is always achievable. This facilitates less stress on the users wrist, which in turn allows for a more comfortable, and a safer work-out.
The hand-grips are formed from a slip-resistant, extruded rubber compound that is non-absorbing and wear-and-tear resistant. They are 35mm (1-3/8″) diameter. Encompassing the hand-grips are the machined, aluminum end-caps, these provide great durability
Range of Motion
All machines within the range have a full and natural range of motion, which increases flexibility and enhances the muscle’s ability to perform
Counterbalanced Weight
The adjustable leg assembly is counterbalanced allowing the user to start an exercise with a small weight selection
Variable Resistance Cams
The cams purpose is to allow the muscle to be equally worked throughout the exercises range of motion
The injection-mouldings are durable, high impact thermoplastic housings, which seal internal components, protecting the vital parts against dust and sweat, and are easy to wipe clean
All rubber coverings are durable and have a high impact resistance; they too, are easy to wipe clean

Seat and Lever / Manual Adjustments
Manual adjustments are made simple via easy-grip, pull spring-loaded, lock-pins that are constructed using a hardened plunger and chrome plated ‘tube-in-tube’ adjustment assemblies
Adjustable Leg Assembly
The leg assembly can be adjusted into nine positions to fit a to fit a wide range of users
Self-Aligning Ankle Roller
Self adjusting tibia pad ensures correct positioning of ankle roller
All points of axis and rotation are located so as to enable perfect alignment of body and machine – reducing the risk of training injury
Multiple Start Positions
The user can choose between multiple starting position using a Single Handed Adjuster. This allows for a wide range of both toning and bodybuilding workouts to be undertaken
Adjustable Seat Back Support
The seat back is adjustable allowing for perfect body alignment

Ease of Use
Weight selection and all adjustments are simple and easy to make from the exercise position with all positions clearly indexed
Graphic Information Panel
The graphic information panel is designed to show an easy-to-follow, simple step-by-step pictorial instructions. These illustrate the machines setup, the correct operating procedure, user start and finish positions and which identify which muscle groups will be trained during the work-out

Upholstery Construction
The long-lasting, easy-to-clean upholstered support pads and rollers, have a high resistance to: abrasion, ageing, bacteria, disinfectant, mildew, oil and stains. They are puncture, wear resistant and made from premium-quality industrial vinyl. Total thickness is 70mm (2-3/4″)

Moulded Plastic Foot Pads
Designed to protect polished floors whilst enhancing safety. Moulded ABS plastic foot pads are supplied as standard

Grades of products
  1. New

Occasionally we will have new equipment available from overstock.  These may be items that have been produced in (for instance) last year’s livery etc.

NB: All new items will be identified as such.

  1. Ex-Demo

These would be products or equipment that we’ve used to demonstrate to one or more potential customers.  They will have been at Pulse HQ, at a Trade Show, or at a customer’s premises.

  1. Grades (A, B & C)

Grade A

A-Grade equipment has been quality checked and is fully operational.  It’s been cleaned to industry standards, serviced and any damaged parts have been replaced.  The product itself may have the odd scratch or dent, but we will have fitted new belts, pulleys, upholstery, seats etc. (if at all required).

Grade B

Some of our products will be listed as B-Grade, these will have been cleaned & serviced by us (during their previous owners warranty).  They will have been used in a commercial fitness environment, and as such will have obvious signs of being pre-owned.

Grade C

Our C-Grade equipment is sold ‘as is’ or ‘as seen’.  There is no requirement for the said items to be either complete or working.

NB: Any substantial elements that are missing/not working will be indicated in the product sales description.

  1. Additional Costs

Premium Delivery & Installation

Service & Maintenance


Pay in 3 interest-free payments so you can spread the cost.
No fees.

Klarna’s Pay in 3 is an unregulated credit agreement. Borrowing more than you can afford or paying late may negatively impact yout fanancial status and ability to obtain credit. 18+, UK residents only. Subject to status. late fees may apply. T&Cs apply.

Clearpay how it works