My Basket

Chest Press / Shoulder Press

£975.00 ex-VAT

Resale Dual Use Chest Press / Shoulder Press 1x68kg Weight Stack Tower in Dark Silver with Black Upholstery


Frame Colour: Frame: Dark Silver, Mouldings: Midnight Grey

Upholstery: Slate Black / Midnight (Single Black Stitching)

Grades: Grade B

Pre-Owned Grade B, Chest Press / Shoulder Press (Strength, Selectorised Dual).
Previously owned by Heartlands Academy (Birmingham), this machine comes with a full service history.

Please Note: We have used a Library Shot to show the products appearance.

Model No

Serial No

1 in stock

We will service this item thoroughly before its dispatched.

Replace the existing upholstery with new. Guaranteed for 3 months.

Extend the Warranty on this item for an extra 12 months.

Make 3 payments of £325 (+VAT). No fees. Learn more
Make 4 payments of £243.75 (+VAT). No fees. Learn more

Product Information


169cm / 66-9/16″
158cm / 62″
131cm / 51.5″

143kg / 315lbs.
Weight Stack Plates – Standard Total Weight
68kg / 150lbs.
Maximum User Weight
180kg / 397lbs.


Frame Construction
All Pulse Fitness products are constructed from durable 3mm (11 gauge) steel that is designed to give exceptional structural integrity and stability even during the most vigorous workout.
Weight Stack Tower – Guarding
The weight stack tower is fully enclosed.
Frame Protection
Once welded, the frames are treated against corrosion by being grit blasted and zinc pre-treated (for guaranteed durability). They are furnace baked, heat-cured and electrostatically epoxy powdered (which ensures maximum adhesion). This gives them a tough, corrosive-resistant and easy to clean finish, offering unbeatable reliability and longevity.

Fully Enclosed Weight Stack Tower / Magnetic and Tethered Weight Stack Pin / Variable Increment Weight Plates / Guide Rods
The Dual Strength Stations provide users with a low starting weight and yet still have the capacity of a full weight plate range. This means users can build up their workout gradually, whilst the equipment still accommodates the widest possible user group.
The weight stack tower is completely covered to provide the best possible user safety experience, protecting bystanders from accidental contact with a moving weight plate. The front facing shroud is full-length, with a 90mm (3-1/2″) wide slot, giving access to the 10mm (3/8″) diameter, weight stack pin. The magnetic weight stack pin assures positive locking into the weight plates and is secured to the weight stack via a plastic-coated tether cable. The pin cannot be removed from the machine. The weight stack pin is colour-coded for easy identification.
The cast and machined solid-steel weight plates are 25mm thick, 4.5kg (10lbs) and 9.1kg (20lbs) sizes, with precision fitted self-lubricating nylon bushes. This is to ensure smooth travel on the guide rods which are 19mm (3/4″) in diameter, made from steel, polished with corrosion-resistant chrome plating for a smooth operation.
The weight stack tower is so positioned to be accessible from a seated position wherever possible.
Weight Stack Suspension
Proven rubber bumper damping system.
Smooth Operation
Pulse Fitness strength products are renowned for their smoothness of operation. This results from our precision-engineered transmission system and weight stack tower assembly, which reduces the coefficient of friction and significantly cuts maintenance costs.
Cable Transmission
Preformed and braided stainless steel (302/304) aircraft cable, measures 4.8mm (3/16″) diameter, and is rated to over 1678kg (3700lbs) load. The 7×19 strand construction, lubricated, nylon-coated cable meets commercial and U.S. military specifications.
Enclosed Pulleys and Bearings
The pulleys come in two sizes, 11cm (4-5/16″) and 11.5cm (4-1/2″) diameter. They are constructed from nylon that is reinforced with fiberglass and designed with a deep V-grooved channel, to provide a secure cable seating.
The pulley’s bearings are ABEC-rated, precision ground and have sealed ball bearing races, for added durability and a ‘fluid’ smooth feel.
The pulley’s pivot axles are 25mm (1″) solid steel with oil-impregnated bronze bushings that allow for precise alignment and frictionless movement.
Handlebar Motion
The converging-axis motion of the arms mirrors the body’s natural 3-Dimensional movement, leading to a smooth, natural exercise motion and providing maximum training effect in the most efficient manner possible.
Hand-Grip Assembly
The hand-grips have been positioned to ensure a neutral wrist position is always achievable. This facilitates less stress on the users wrist, which in turn allows for a more comfortable, and a safer work-out.
The hand-grips are formed from a slip-resistant, extruded rubber compound that is non-absorbing and wear-and-tear resistant. They are over-sized in diameter 39mm (1-1/2″). Encompassing the hand-grips are the machined, aluminium end-caps, these provide great durability.
Range of Motion
All machines within the range have a full and natural range of motion, which increases flexibility and enhances the muscle’s ability to perform.
Counterbalanced Weight
The handlebar arms are counterbalanced allowing the user to start an exercise with a small weight selection.
The injection-mouldings are durable, high impact thermoplastic housings, which seal internal components, protecting the vital parts against dust and sweat, and are easy to wipe clean.
All rubber coverings are durable and have a high impact resistance; they too, are easy to wipe clean.

Seat and Lever / Manual Adjustments
Manual adjustments are made simple via easy-grip, pull spring-loaded, lock-pins that are constructed using a hardened plunger and chrome plated ‘tube-in-tube’ adjustment assemblies.
All points of axis and rotation are located so as to enable perfect alignment of body and machine – reducing the risk of training injury.
Multiple Start Positions
The user can choose between multiple starting position. This allows for a wide range of both toning and bodybuilding workouts to be undertaken.
Multiple Grip Positions
Multiple grip positions allows the user to be more specific about which muscle groups are worked out.
Adjustable Seat Back Support
The seat back is adjustable allowing for perfect body alignment.

Ease of Use
Weight selection and all adjustments are simple and easy to make from the exercise position with all positions clearly indexed.
Graphic Information Panel
The graphic information panel is designed to show an easy-to-follow, simple step-by-step pictorial instructions. These illustrate the machines setup, the correct operating procedure, user start and finish positions and which identify which muscle groups will be trained during the work-out.

Upholstery Construction
The long-lasting, easy-to-clean upholstered support pad has a high resistance to: abrasion, ageing, bacteria, disinfectant, mildew, oil and stains. It is puncture, wear resistant and made from vinyl.  Producing a total pad thickness of 70mm (2-3/4″)
Personal Storage
At the top of the weight stack tower, there is provision for a users personal storage. The storage dish and bucket have enough room to deposit items like mobile phones, keys & even a water bottle.

Moulded Rubber Foot Pads
Designed to protect polished floors whilst enhancing safety. Moulded rubber foot pads are supplied as standard.

Grades of products
  1. New

Occasionally we will have new equipment available from overstock.  These may be items that have been produced in (for instance) last year’s livery etc.

NB: All new items will be identified as such.

  1. Ex-Demo

These would be products or equipment that we’ve used to demonstrate to one or more potential customers.  They will have been at Pulse HQ, at a Trade Show, or at a customer’s premises.

  1. Grades (A, B & C)

Grade A

A-Grade equipment has been quality checked and is fully operational.  It’s been cleaned to industry standards, serviced and any damaged parts have been replaced.  The product itself may have the odd scratch or dent, but we will have fitted new belts, pulleys, upholstery, seats etc. (if at all required).

Grade B

Some of our products will be listed as B-Grade, these will have been cleaned & serviced by us (during their previous owners warranty).  They will have been used in a commercial fitness environment, and as such will have obvious signs of being pre-owned.

Grade C

Our C-Grade equipment is sold ‘as is’ or ‘as seen’.  There is no requirement for the said items to be either complete or working.

NB: Any substantial elements that are missing/not working will be indicated in the product sales description.

  1. Additional Costs

Premium Delivery & Installation

Service & Maintenance


Pay in 3 interest-free payments so you can spread the cost.
No fees.

Klarna’s Pay in 3 is an unregulated credit agreement. Borrowing more than you can afford or paying late may negatively impact yout fanancial status and ability to obtain credit. 18+, UK residents only. Subject to status. late fees may apply. T&Cs apply.

Clearpay how it works